Skip to content
All articles

Deliverability · 29 October 2026 · 8 min read

How to warm up a new sending domain

Rampsend team

Ramp up, don’t blast

A new sending domain has no history. Gmail, Yahoo and Microsoft have never seen mail from it, so they have no idea whether its recipients want it. If the first thing they see is 50,000 messages in an hour, they assume the worst and filter accordingly. A warm-up avoids that by building a track record on purpose: a small amount of mail to people who want it, then a bit more, rising only while the signals stay healthy. This guide covers why it works, a sample ramp, what to send first and how to tell when to slow down.

Why new domains need warming up

Mailbox providers decide where a message goes largely on reputation, and reputation is attached to the sending domain. Gmail, for example, tracks a reputation for the domain that signs your mail with DKIM, alongside the reputation of the IP addresses it comes from, so a new domain starts from scratch even on well-established servers. A domain with no history starts with no reputation, which is not the same as a good one.

Providers learn about a domain from what recipients do with its mail. Opens, replies, moving a message out of spam and adding the sender to contacts are positive. Deleting without reading, marking as spam and bounces from addresses that do not exist are negative. A warm-up gives providers enough positive signals, at a pace they can measure, to conclude that your mail is wanted.

Two other things make a slow start sensible. Many providers throttle unfamiliar senders, deferring part of a large burst with temporary errors, so a big first send arrives in pieces anyway. And a sudden spike from an unknown domain is a pattern spammers produce, which raises filters' suspicion on its own.

Before you send anything

A warm-up on a misconfigured domain builds nothing. Check these first:

  • Authentication. DKIM signing with your domain, SPF aligned through a custom MAIL FROM subdomain, and a DMARC record. The SPF, DKIM and DMARC guide covers each.
  • Sender requirements. One-click unsubscribe on marketing mail and a monitored Reply-To. See the Gmail, Yahoo and Outlook checklist.
  • A clean list. Remove addresses that have bounced before, people who unsubscribed elsewhere and anyone you cannot show gave permission. A suppression list carried over from your old provider saves you re-learning old bounces the hard way.
  • Monitoring. Verify the domain in Google Postmaster Tools before day one, so you can see your Gmail spam rate as it forms.

A sample ramp

There is no single correct schedule. The table below is a reasonable default for a sender planning to reach around 50,000 emails a day. Each step assumes the previous one went well; if it did not, repeat it.

DaysEmails per dayWho to send to
1–2200People who opened or clicked in the last 30 days
3–4500Same group, widened
5–61,000Engaged in the last 30–60 days
7–92,500Engaged in the last 60 days
10–125,000Engaged in the last 90 days
13–1510,000Add recent signups and active customers
16–1920,000Engaged in the last 6 months
20–2435,000Broader active list
25–2850,000Full list of people who still engage

The pattern matters more than the numbers: start small, roughly double every few days, and widen the audience from most engaged to least. If your full volume is 5,000 a day, you will finish in about two weeks. If it is 500,000, keep stepping for longer.

Spread each day's volume over several hours rather than one burst, and keep a steady rhythm. A domain that sends every weekday looks more trustworthy than one that sends nothing for a week and then everything on a Tuesday.

What to send first

The first emails should be the ones most likely to be opened and least likely to be reported.

Transactional mail is the ideal start. Receipts, sign-in links, password resets and account notifications are expected, opened quickly and almost never marked as spam. If you are moving an existing product to a new domain, move transactional mail first and let it build reputation for a week before marketing joins. The transactional vs marketing guide covers why the two behave so differently.

Then your most engaged subscribers. People who opened or clicked recently are the best audience for early marketing sends. Send them something genuinely useful — a product update they asked for, a useful guide — rather than your hardest sales push.

Leave cold segments for last, or out altogether. Addresses that have not opened anything in a year are where spam traps and abandoned mailboxes hide. Bring them in at the end of the ramp in small batches, or run a separate re-engagement email and drop everyone who ignores it.

Signals to watch

Check these every day during a warm-up, and before each step up.

SignalHealthySlow downStop
Hard bounce rateUnder 1%1–2%Above 2%
Spam complaint rateUnder 0.05%0.05–0.1%Above 0.1%
Gmail spam rate (Postmaster Tools)Under 0.1%0.1–0.3%0.3% or more
Deferrals (temporary errors)OccasionalRising day on dayMost mail to one provider deferred
EngagementSteady or risingFalling sharplyClicks near zero at one provider

A few notes on reading them.

Look per provider. A bad day at Microsoft with a good day at Gmail means the problem is specific to Outlook recipients, usually a segment or a content issue. A blended average hides that.

Be careful with open rates. Apple Mail Privacy Protection opens tracked images automatically, which inflates opens and makes them a weak signal. If your platform separates machine opens from real ones, use the real opens; otherwise lean on clicks. Apple Mail Privacy Protection and open rates explains the difference.

Complaints arrive late and incomplete. Gmail does not report individual complaints to senders, so your platform's complaint rate mostly reflects Yahoo, Microsoft and others. Postmaster Tools is where the Gmail figure appears, usually a day or two behind.

When to slow down or stop

Treat the ramp as a set of gates, not a calendar.

  • Hold when any signal sits in the "slow down" column. Repeat the current volume for another few days and only step up once it is back to healthy.
  • Step back to the last volume that was healthy when a signal moves into the "stop" column. Then find the cause: usually one segment, one import or one email.
  • Stop entirely if bounces are high across the board. That points to a list problem, not a volume problem, and more sending will only make it worse.

When something goes wrong, the cause is almost always the audience rather than the ramp speed. Look at which segment you added most recently, and remove it before you try again. The bounce and complaint rates guide goes deeper on diagnosing each kind of failure.

How Rampsend helps during a warm-up

Rampsend sends through Amazon SES and is built to protect a new domain from its own worst day. Hard bounces, complaints and unsubscribes are added to your suppression list automatically, so a bad address is mailed once at most, and suppressed recipients are skipped and not charged. If your hard bounce or complaint rate spikes, sending pauses for the workspace before the damage spreads, and the API answers with sending_paused until you have looked at it. The thresholds are published in our acceptable use policy.

New accounts also start with a daily sending cap that lifts once sending looks healthy, which acts as a built-in brake on a too-fast start. The deliverability dashboard shows bounce and complaint rates and the top bounce reasons, and open tracking reports machine opens apart from real ones, so the engagement signal you warm up against is honest. If you work with an AI assistant, get_stats over MCP gives you the same numbers in a sentence; see the MCP section of the docs.

Keep it warm

Reputation fades when a domain goes quiet and drops when mail stops being wanted. After the warm-up, keep a steady sending rhythm, keep sending mostly to people who engage, and re-check your rates whenever you add a new source of addresses. The Free plan covers 1,000 contacts and 6,000 emails a month, enough to get authentication and your first transactional sends right before you scale; the pricing page has the rest.

Frequently asked questions

How long does warming up a domain take?

Usually two to six weeks, depending on how much you plan to send and how engaged your list is. Small senders reach their normal volume quickly; senders aiming for hundreds of thousands a day take longer.

Do I need to warm up if I only send transactional email?

Transactional mail warms a domain naturally, because volume grows with your users and people open it. You still benefit from not launching with a sudden large burst, such as importing old users and emailing all of them on day one.

Is warming up a domain the same as warming up an IP?

No. IP warm-up matters when you have a dedicated IP address. Domain warm-up matters for everyone, because Gmail and other providers track reputation by sending domain regardless of the IP.

Can I warm up with purchased or scraped lists?

No. Those lists produce bounces, spam-trap hits and complaints, which is the opposite of what a warm-up is meant to build, and they breach most providers' acceptable use rules.

What should I do if my bounce or complaint rate jumps during warm-up?

Stop raising volume, find the segment that caused it and remove it. Resume at the last level where the numbers were healthy. See bounce and complaint rates for thresholds.